Super Blue Sludge plus has extra holding power for making larger beads or for any procedures which put rotational stress between the bead and mandrel.

Category : Art/Media/Performance - Flameworking

- Back to Top

Tungsten tools stand up to heat better then conventional stainless steel and are less likely to stick to glass. Perfect for poking holes in glass, making small bubbles and more.

Category : Art/Media/Performance - Flameworking

- Back to Top

Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Versatile two in one mold creates a critter body 5/8 x 1 x 5/16 (see spider project below by artist Cere Carrington) and a pendant 3/4 x 1 x 7/16 thick (as shown above). Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Projects shown below created by glass artist Cere Carrington using this mold.

Category : Art/Media/Performance - Flameworking

- Back to Top

Use paddle to shape molten glass. The extra long handle is designed to allow for a strong but comfortable grip. Graphite is lightweight and will not stick to hot glass. Paddle measures 2 x 3.

Category : Art/Media/Performance - Flameworking

- Back to Top

Tungsten tools stand up to heat better then conventional stainless steel and are less likely to stick to glass. Perfect for poking holes in glass, making small bubbles and more.

Category : Art/Media/Performance - Flameworking

- Back to Top

Create Perfect Shapes Make perfect marbles or precisely round beads for jewelry. The heavy duty graphite mold feature two marble sizes per mold. Designed for use with a 3/8 mandrel. The 5/8 mold ( 313534) and 7/8 mold ( 313781) are sold separately. Images below from artist Nancy Pilgrim and 39;s 1000 Glass Beads book, 5988.

Category : Art/Media/Performance - Flameworking

- Back to Top

Part of the Perfect Tool System for flameworkers. The marble push mold gives you three molds in one. Make perfectly shaped marbles 3/8, 1/2 and 5/8 in diameter. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Marble Mold Plate.

Category : Art/Media/Performance - Flameworking

- Back to Top

Part of the Perfect Tool System for flameworkers. The leaf gives your four contemporary, nature inspired shapes in one. It and 39;s four 1/16 deep shapes, 9/16, 5/8, 3/4 and 7/8 in diameter. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Cere Seddon using the Leaf Press Plate.

Category : Art/Media/Performance - Flameworking

- Back to Top

Part of the Perfect Tool System for flameworkers. Create four 1/16 deep splat shapes, 1/9, 5/8, 3/4 and 7/8 in diameter. The image above shows the top of the press plate. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable graphite marver or press plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Cere Seddon using the Splat Press Plate.

Category : Art/Media/Performance - Flameworking

- Back to Top

Use the paddle to shape molten glass. The graphite is lightweight and will not stick to hot glass. It measures 5 x 3 to give you a large working surface.

Category : Art/Media/Performance - Flameworking

- Back to Top