Set of two shears to cut molten glass. Cut off excess glass, reshape your bead or cut the trailing edge of a molten glass rod with these shears. Set includes a pair of 3 shears and 6 shears.

Category : Art/Media/Performance - Flameworking

- Back to Top

Fireworks bead press is an easy way to make flattened beads or 3-D shapes. Simply place your molten bead between the paddles and squeeze.Adjustable height feature allows you to make a variety of flat bead thicknesses. 11 long, paddles are 2 x 2.

Category : Art/Media/Performance - Flameworking

- Back to Top

Tool rest and 39;s V-shaped design allows you to safely rest hot mandrels, glass and tools on your work surface for easy access. Keeps the hot ends up and your hands cool. 7-1/2 x 1-1/2. A Delphi Favorite.

Category : Art/Media/Performance - Flameworking

- Back to Top

What and 39;s the secret to professional looking leaf beads? Leaf mashers. Simple to use, mashers require little pressure to make the desired shape. You can create realistic three-dimensional glass leaves easily with this innovative tool. The Leaf Masher features a leaf pattern mold atop pliers. Use with hot glass to create leaves which can be used alone for simple projects. Or, use a number of our different leaf mashers to create a stunning necklace or bracelet with depth and interest. Makes leaves approximately 1-1/4 x 1-1/4. Necklace created by Delphi Art Glass Festival entrant Patricia Venaleck. Sample of leaf made with mashers below.

Category : Art/Media/Performance - Flameworking

- Back to Top

Apply embellishments to beads quickly and uniformly. Simply roll molten glass in the scoop. When finished with one color, pour unused frit or enamel back into the container. No fuss, no mess. It and 39;s an incredibly handy and quick way to switch out colors at the torch and keep your workshop clean and organized Premium graphite, professional design. 1 diameter x 5 long x 1/2 handle.

Category : Art/Media/Performance - Flameworking

- Back to Top

Use Graphite Tools for Professional Results Spread frit evenly in the tray and you are ready to roll. Use with mica powders, enamels, frit and foil for even embellishment coverage on glass beads. Premium recessed graphite tray keeps materials from sliding and makes clean up quick and easy. 2 x 2-3/4 x 1/2 deep.

Category : Art/Media/Performance - Flameworking

- Back to Top

For Ultimate Workshop Efficiency Set near your flame to create a rod warmer. Rest rods on the stepped base and position ends near the flame to gradually pre-heat glass while working with other beads. Slots allow you to move rods incrementally closer to the flame, saving you time and reducing the possibility of thermo-shock. Rest can also be used away from the flame to set hot glass or tools down safely.

Category : Art/Media/Performance - Flameworking

- Back to Top

Part of the Perfect Tool System for flameworkers. Table Top Mount rests securely on your table top, raising marvers 3 from the table. Attaches to interchangeable graphite marver plates, including Angled Groove 8658, Bicone 8657, Flat 8656 and Monster Masher 8659. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 as shown below or Table Top), then add interchangeable 2 x 3 graphite marver plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable grahite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Angled Groove Marver 8658.

Category : Art/Media/Performance - Flameworking

- Back to Top

Part of the Perfect Tool System for flameworkers. Torch Mount Base fits torches up to 1-1/4 diameter and attaches to interchangeable graphite marver plates, including Angled Groove 8658, Bicone 8657, Flat 8656 and Monster Masher 8659. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount as shown above or Table Top 86511), then add interchangeable 2 x 3 graphite marver plates. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable grahite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Angled Groove Marver 8658.

Category : Art/Media/Performance - Flameworking

- Back to Top

Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Creates round flowers 1 x 1/2 thick. Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Project shown above created by artist Cere Carrington.

Category : Art/Media/Performance - Flameworking

- Back to Top