Get greater control with this innovative tool. The 2 x 4 graphite paddle has a tapered beveled edge and rounded corner for rolling and forming beads. The feature that truly sets this tool apart is the special grooves cut into the paddle. Designed to support your mandrel and help maintain constant pressure and an even angle against the graphite paddle, the grooves make picking up foil and inclusions easier than ever.

Category : Art/Media/Performance - Flameworking

- Back to Top

Easily preheat your glass before introducing it to the flame to prevent thermal shock. Launch Pad is made of a durable soapstone surface able to withstand high temperatures and retain heat. Great for beginners and advanced users, just place fuel source in Launch Pad, remove lid and ignite fuel. Surface will reach up to 800 degrees F in approximately 5 minutes and be ready for use. Includes one 8 hour heat source (item 89002). Delphi Tip Use Launch Pad with Stump Sucker (item 75503) and Hose ( 75506) to perfectly and easily encase your objects with a clear glass layer. Remove the threaded rod from Stump Sucker and Hose and insert into the hole on the surface of the Launch Pad. Re-assemble Stump Sucker so it is attached directly to the Launch Pad (screw included.) Experiment with heat times to ensure optimum results.

Category : Art/Media/Performance - Flameworking

- Back to Top

One replacement heat source for Launch Pad (item 89001). Heats up to 800 degrees F and lasts 8 hours.

Category : Art/Media/Performance - Flameworking

- Back to Top

Make Fun Shapes Fast Push molds offer a jump start on creativity. Simply press a gather of molten glass into the mold and you are left with a perfectly detailed shape. Creates a 3/4 x 1 x 1/4 thick leaf. Display it on its own, with other leaves, or use it in combination with flowers created in the Spiral Flower Push Mold 86514. Add a loop of glass to create pendants or buttons, or form beads on a mandrel. Create an entire series of sculptural glass pieces in an afternoon. Premium graphite mold is approximately 2 x 1/2 x 3/4. Project shown below created by glass artist Cere Carrington.

Category : Art/Media/Performance - Flameworking

- Back to Top

Create Perfectly Shaped Leaves Make realistic leaf-like patterns in your sculptural work. Simple to use, mashers require little pressure to make the desired shape. Save on mashers with the 3-Pack. Includes Economy Mashers (creates leaves 1-1/2 long), Flat Mashers with Veins (creates leaves 1-1/4 long), and Deluxe Angled Mashers (creates leaves 1-1/4 long). Necklace created by Delphi Art Glass Festival entrant Patricia Venaleck. Samples of leaves made with mashers below.

Category : Art/Media/Performance - Flameworking

- Back to Top

Easily create perfect lentil beads with this durable tool. Makes beads 5/8 diameter. Artist Heather Trimlett and artist Val Oswalt created the beautiful lentil beads below.

Category : Art/Media/Performance - Flameworking

- Back to Top

A must for finishing marbles and intricate beads. Detach your marbles from the punty securely without any unsightly chill marks. Marbles up to 1 1/2.

Category : Art/Media/Performance - Flameworking

- Back to Top

This durable stainless steel tool has mashing surfaces that are 3/4 square, and are excellent for delicate work. Mashing is accomplished by squeezing the handles together.

Category : Art/Media/Performance - Flameworking

- Back to Top

Part of the Perfect Tool System for flameworkers. The 2 x 3 Monster Masher plate is perfect for pre-heating millefiori and other embellishments, can also be used to shape beads. Use the smooth flat surface and 90 degree angles to create perfectly shaped beads. The image above shows both the top and bottom of the marver. The bottom has an extended plus sign that securely fits either the Torch Mount 8655 or the Table Top Pedestal Base 86511 to keep the plate stable as the glass is worked. The Perfect Tool System, shown below, allows you to create a variety of perfectly shaped beads, every time. Set up your Perfect Tool Base (either Torch Mount 8655 or Table Top 86511), then add interchangeable 2 x 3 graphite marver plates, including the one shown here. Plates are easy to position, even while you work, yet sit securely allowing you to create with confidence. Pieces sold separately, allowing you to build on your system as you go. System is easy-to-use for hobbyists, and features premium graphite, so it and 39;s long-lasting for professionals. Step-by-Step Incredible Bead Shaping System Images shown below 1. Secure the Torch Mount Base to your torch. 2. Position the interchangeable graphite marver of your choice on to the base. Unique design securely holds it in place. 3. Create your bead. Easily change the position and type of marver while you and 39;re working. Project shown below created by glass artist Val Oswalt using the Monster Masher Marver.

Category : Art/Media/Performance - Flameworking

- Back to Top

The Secret to Perfectly Shaped Beads Create amazingly uniform beads with this parallel convex press. The large 2-1/2 x 1-3/8 paddles are excellent for forming large, perfectly shaped olive beads. Use the adjustable set screw to ensure that beads are evenly sized by preventing the press from closing all the way. Premium, durable stainless steel. This is one tool that is certain to become a workshop favorite. Bead artist Val Oswalt created the bead below using the Olive Press.

Category : Art/Media/Performance - Flameworking

- Back to Top