BRONZclay Essential Use the removal fork to lift the Firing Pan 63424 from kiln after firing and transfer it to a heat-safe surface for cooling. 36 total length, constructed of stainless steel with 6-1/2 long tines. The two wood handles ensure good grip and leverage.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

Easy to Use, Fast to Fire Take the guesswork out of firing low fire metal clays. Set the SpeedFire Cone on full, when it reaches 1300?, fire clay for 15 minutes and it and 39;s done. Comes complete with a propane burner, pyrometer assembly, propane bottle base and simple instructions. Propane not included. Delphi Tip Use the BeadFire Grid, 80702 to fire multiple projects at once. See a close-up of the SpeedFire Cone with the grid below.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

Use wire brush to remove white oxidation from fired silver jewelry clay projects. A good tool for the first step in polishing your fired piece.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

BRONZclay Essential Rugged, high quality stainless steel pan is used to contain activated carbon to fire bronze clay. Measures 7 wide x 6-1/2 deep x 4 long.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

1 lb of stainless steel shot. Can be used hundreds of times. Use as replacement for the shot that comes with Tumbler 67023.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

Add extra color to your beads with this Italian rod compatible 104 COE enamel set. Just sift the enamel on your bead, or roll the bead in the enamel for a burst of color. Set of 16 opaque enamels to use with 104 COE glass. Includes 1 ounce each of the following colors White, Brown Beige, Goldenrod, Gray Green, Moss Green, Blue Green, Baby Blue, Oxford Blue, Light Petal Pink, Flesh, Brite Red, New Purple, Dark Orchid, Peach, Orange Red, Oxford Gray. Step-by-Step Enamels See images below 1. Place a small amount of enamel on a graphite pad or other heat resistant work surface. 2. Gently roll the hot bead over enamel for desired effect. 3. Return the bead to the flame and heat bead evenly.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

Add extra color to your beads with this Italian rod compatible 104 COE enamel set. Just sift the enamel on your bead, or roll the bead in the enamel for a burst of color. Set of 14 transparent enamels to use with 104 COE glass. Includes 1 ounce each of the following colors Gem Green, Grass Green, Beryl Green, Turquoise, Aqua Blue, Water Blue, Bonnet Blue, Nitric Blue, Cherry Pink, Clear and now Wax Yellow, Khaki, Spring Green, and Amethyst. Step-by-Step Enamels See images below 1. Place a small amount of enamel on a graphite pad or other heat resistant work surface. 2. Gently roll the hot bead over enamel for desired effect. 3. Return the bead to the flame and heat bead evenly.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

An Excellent Value. Great for Beginners. Enter the fascinating world of bead making. With this kit and a few hours of practice, you will be making your own unique glass beads in all shapes and sizes. Kit includes all the basics for creating glass beads. Torch head requires MAPP gas, available at most hardware stores. See image of making beads with kit below. Delphi recommends wearing safety glasses, sold separately.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

For Professionally Finished Beads Line the inside of your glass beads with copper. Use with our bead liner tool ( 88001) for fast results or line your beads by hand using traditional methods. Fits beads made on a 1/8 mandrel. Measures 12 in length, it can be used in multiple projects. .014mm wall thickness. Below is glass bead finished with sterling silver lining. By Delphi artist Melanie Churchill.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top

Thin, lightweight and easy to cut, 90 COE Wasser is an ideal glass for beginners and experts alike. Wonderful for fusing, bead work, and even foil applications. Flash is a technique in which colored glass is fired onto the surface of another layer of glass. Wasser and 39;s Flash glass uses a solid white base, with a layer of color on top. This technique allows the user to sandblast or etch through the thin top glass layer and reveal the semi-transparent white glass underneath.

Category : Art/Media/Performance - Jewelry Supplies

- Back to Top