Create flexible custom borders. Each kit can be put together 2 ways (see additional image below). Use these bevel cluster kits in combination 1 1/2 rectangle bevels (items 5238 and 5233) to expand your options. These bevels are 1-1/2 wide. Total 4 pieces.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

No Mess. No Toxic Fumes. Seal and strengthen leaded stained glass without cement - in two minutes flat. Simply insert No Days Glaze into came, insert the glass and heat to 150 degrees to seal. Includes instructions. 5/32 face, pieces 6 feet in length. 3 pieces per pack. For helpful hints and step-by-step instructions, click View User Manual. Seen in first image below are black, pewter and clear No Days Glaze in the workshop. Set-up is easy. See images below. Step 1. Insert the No Days Glaze into the came. Press glass against the surface of the No Days Glaze. Step 2. Heat glass using a heat gun where the glass meets the came. Step 3. When the glass is heated, press the glass into the No Days Glaze to allow it to form to all three sides of the glass and came surfaces. Step 4. Allow glass to briefly cool while you begin to work on your next piece.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

No Mess. No Toxic Fumes. Seal and strengthen leaded stained glass without cement - in two minutes flat. Simply insert No Days Glaze into came, insert the glass and heat to 150 degrees to seal. Includes instructions. 5/32 face, pieces 6 feet in length. 3 pieces per pack. For helpful hints and step-by-step instructions, click View User Manual. Seen in first image below are black, pewter and clear No Days Glaze in the workshop. Set-up is easy. See images below. Step 1. Insert the No Days Glaze into the came. Press glass against the surface of the No Days Glaze. Step 2. Heat glass using a heat gun where the glass meets the came. Step 3. When the glass is heated, press the glass into the No Days Glaze to allow it to form to all three sides of the glass and came surfaces. Step 4. Allow glass to briefly cool while you begin to work on your next piece.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

No Mess. No Toxic Fumes. Seal and strengthen leaded stained glass without cement - in two minutes flat. Simply insert No Days Glaze into came, insert the glass and heat to 150 degrees to seal. Includes instructions. 5/32 face, pieces 6 feet in length. 3 pieces per pack. For helpful hints and step-by-step instructions, click View User Manual. Seen in first image below are black, pewter and clear No Days Glaze in the workshop. Set-up is easy. See images below. Step 1. Insert the No Days Glaze into the came. Press glass against the surface of the No Days Glaze. Step 2. Heat glass using a heat gun where the glass meets the came. Step 3. When the glass is heated, press the glass into the No Days Glaze to allow it to form to all three sides of the glass and came surfaces. Step 4. Allow glass to briefly cool while you begin to work on your next piece.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

Cut a perfect 90 degree notch out of single-sided U channel came every time with this handy tool. Just slip the channel into the slot and push the handle down. It and 39;s a fast and easy way to make edges on stained glass lamps, picture frames, boxes etc. Works with single-sided U 1/8 or 5/32 brass, copper and zinc. Recommended for use with Cascade Metals cames.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

Straighten Any Length of Lead Here and 39;s an easier way to stretch your lead. The Adjustable Rail system, when used with the Stanton Lead Stretcher 40560, allows you to stretch or straighten any length of lead. Rails are easy to set up and accommodate 1/8 to 5/8 came. If you already have the popular Stanton lead stretcher, upgrade it with the Adjustable Rails to get even more out of your tool. If you haven and 39;t yet tried the Stanton Lead Stretcher now is the time. Use it with the Adjustable Rails for a complete system to stretch your lead easily and accurately for all your came projects. A quality tool from Glastar. Note Photo shows Adjustable Rails with the Stretcher. Stretcher sold separately.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

Bend Came With Ease At the turn of a handle, this Came Bender forms precision curves on zinc, brass, and copper channel. This means greater design freedom for stained glass artisans when a rigid came is required. Bends both U shape and H shape came channels, all on one set of rollers.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

Inland and 39;s CarbonTuff table saw blade is designed to cut most metals, including came for stained glass projects. Diameter 5 (125 mm) Arbor Hole 1/4 (12.7 cm)

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

This handy tool allows you to cut zinc or brass came at perfect 45? angles. The Clean Cut mitre vise holds edge came securely between two blocks in exact position for cutting straight lines or 45? angles. After trying the Clean Cut you and 39;ll wish you had one sooner.

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top

This is the ultimate tool for cutting lead at perfect 30?, 45?, 60?, and 90? angles. Simply set desired angle on the swiveling fence, feed lead under the blade against the length stop, and depress the handle it and 39;s so easy. Cuts lead came quickly and efficiently with minimal waste. Convenient too; use inexpensive standard single-edge razor blades for replacement blades. Lifetime warranty (excludes blades).

Category : Art/Media/Performance - Stained Glass Supplies

- Back to Top